Pitney Bowes N521P CONNECTING, METER, A B, WIRES, CABLES, &

CHAPTER 1: INTRODUCTION

CONNECTING

WIRES, CABLES, &

METER

Your scale should already have been installed, either by yourself or by a Pitney Bowes engineer. This section has been included to assist you if a lead comes loose or you relocate the system.

1. Connect the small end of the power cord to the scale.

2.If using a Postage Meter, connect the small end of the meter cable to the scale connector A.

Some meter cables may have a second connector which locates onto scale connector B. If your cable doesn’t have this second connector, nothing needs to be connected at point B.

3.Tuck the cord(s) under the guides on the bottom of the scale.

A B

4

Contents

- UK Model N521 & N521P CHAPTER INTRODUCTION ABOUT YOUR SCALE SAFETY PRECAUTIONS SCALE & KEYPAD IDENTIFICATION CONNECTING METER SPECIFICATIONS GETTING HELP Page USING YOUR SCALE THE KEYBOARD Category/Carrier Keys Scroll Keys Alpha-numeric& Colour Keys Scale Control Keys Meter Control Keys USING THE SCALE Choosing a Category Select Category prompt Enter Choosing Fees C/CE Manually Adding a Value Processing Additional Items Meter Set Tape USING THE WEIGHT HOLD FEATURE Currency Breakdown Meter Set USING ‘SCALE FUNCTIONS’ Parts Count Parts Count METER FUNCTIONS Funds Account Status Select Account Clear Account CHANGING SETUP OPTIONS Supervisor Options Exit Supervisor Setup At the Enter Password prompt: , M G R TROUBLESHOOTING DIAGNOSING PROBLEMS Probable Symptom Cause Recommendation Page MAINTAINING YOUR SCALE CLEANING LEVELLING POSTAGE RATE Fitting the PROM 1. Turn power OFF at the wall outlet SERVICE