Planar LC12 manual Basic Construction

2.0Basic Construction

2.1Weight

Monitor weight does not exceed 5 Kgs (11 lbs).

2.2Mechanical Mounting Requirements

Per Planar Mechanical Outline drawing 074-0666-01

2.3Monitor Electronics

Electronic components requiring heat sinks are installed independent of the Monitor enclosure. That is, its sheet metal chassis is not used as a heat sink for any electronic component.

2.4Cooling Fan

Cooling fans are installed to maintain appropriate internal operating temperatures when the Monitor is subjected to its operating environment of Section 3. Forced air convection is used to cool the LCD Panel (front and back).

2.5Vandal Glass

The Monitor is designed to operate with a vandal glass 289 mm x212 mm x 10 mm in place. This vandal glass in not provided with the Monitor.

2.6Air Filtration

An air filter mesh is included to prevent ingress of insects and ensure continual flow of cooling air within the Monitor. The air filter mesh is externally accessible for cleaning.

2.7Connectors

There are two (2) connectors supplied as an integral part of the Monitor.

2.7.1Video Signal Connector

The Monitor unit includes a chassis mounted 15-pin female mini D-Shell connector (AMP 748390-5 or equivalent) with socket contacts at the rear of the Monitor. It is shielded for electromagnetic interference (EMI) purposes. Refer to Section 4.1 for electrical connections.

2.7.2DC Power Input Connector

The DC power input connector is a chassis mounted 2-pin "MAT?N?LOK" style connector (AMP 1-480699-0 or equivalent) with pin contacts at the rear of the Monitor. Connections are insulated to insure no accidental contact.

Title: Product Specification: LC12 High-Bright Monitor	Page 5 of 24
Document Number: 023-0284-01	Revision: A