Login And System Status
Chapter 3 | 3 |
Login And System Status |
This Chapter details the first time login procedure and the Status screen
Login
ADE-4000 contains an HTTP server. This enables you to connect to it, and config- ure it, using your Web Browser. Your Browser must have JavaScript support. The configuration program has been tested on the following browsers:
∙Netscape V4.08 or later
∙Internet Explorer V4 or later
Preparation
Before attempting to configure ADE-4000, please ensure that:
∙Your PC can establish a physical connection to ADE-4000. The PC and ADE- 4000 must be directly connected (using the ETHERNET port on ADE-4000) or on the same LAN segment.
∙ADE-4000 must be installed and powered ON.
∙If ADE-4000's default IP Address (10.0.0.2) is already used by another device, the other device must be turned OFF until ADE-4000 is allocated a new IP Ad- dress during configuration.
Connecting to ADE-4000
To establish a connection from your PC to ADE-4000:
1.After installing ADE-4000 in your LAN, start your PC. If your PC is already running, restart it.
2.Start your WEB browser.
3.In the Address box, enter "HTTP://" and the IP Address of ADE-4000, as in this example, which uses ADE-4000's default IP Address:
http://10.0.0.2
4.If connection is established, a pop-up password request page will show up. The default login User Name of ADE-4000 administrator is “admin”, and Password is “epicrouter”. The default login User Name for non-administrator is “user”, and Password is “password”.