Figure 4-9: Fixed IP set-up screen
Step 2
Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/ Routed Mux, Classical IP over ATM). And Disable “Bridge” function.
Step 3
Click “submit” to commit modifications you’ve done, then click “Save Configura- tion” to store settings. (Modifications will not take effects until next reboot.)
Step 3
Click on “NAT” tab on left panel, and enable the NAPT function in the option menu.
Step 4
Click “Save settings” on left panel to write configuration into machine, and reboot to make settings effective.
Dynamic IP for WAN
If ISP provides a dynamic IP for Internet connection, following steps illustrate how to enable the connection via
Step 1
Choose suitable packet encapsulation (1483 Bridged/ Routed LLC, 1483 Bridged/ Routed Mux, Classical IP over ATM). And Disable “Bridge” function.
Step2
Check the DHCP option, and fill in the Host Name field (if required.) (This informa- tion should be obtained from ISP. If there is no special demand for this, leave this column blank.)
16
