Introduction

WLAN

On - Wireless enabled.

 

Off - No Wireless connections currently exist.

 

Flashing - Data is being transmitted or received via the Wireless

 

access point. This includes "network traffic" as well as user data.

ADSL

On - ADSL connection is available.

 

Off - No ADSL connection available.

 

Flashing - Data is being transmitted or received via the ADSL

 

connection.

Internet

On - Internet connection is available.

 

Off - No Internet connection available.

 

Flashing - Data is being transmitted or received.

Rear Panel

RESET Button (Reset to De- faults)

POWER port

10/100BaseT LAN connections

ADSL port

Figure 3: Rear Panel of ADW-4302v2

This button will reset the ADW-4302v2 to the factory default settings.

To do this, press and hold the Reset Button for five (5) sec- onds, until the Status LED is lit, then release the Reset Button, and wait the ADW-4302v2 to restart using the factory default values.

Connect the supplied power adapter here.

Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports.

Note:

Any LAN port on the ADW-4302v2 will automatically function as an "Uplink" port when required. Just connect any port to a normal port on the other hub, using a standard LAN cable.

Connect this port to your ADSL line.

5