Installation

3. Connect ADSL Cable

Connect the supplied ADSL cable from to the WAN port on the ADW-4302v2 (the RJ-11 connector) to the ADSL terminator provided by your phone company.

4. Power Up

Connect the supplied power adapter to the ADW-4302v2. Use only the power adapter provided. Using a different one may cause hardware damage.

5. Check the LEDs

•The Power LED should be ON.

•The Status LED should flash, then turn Off. If it stays on or blinking after 60 sec- onds, there is a hardware error.

•For each LAN (PC) connection, one of the LAN LEDs should be ON (provided the PC is also ON.)

•The WLAN LED should be ON.

•The WAN LED should be ON if ADSL line is connected.

•The Internet LED may be OFF. After configuration, it should come ON.

For more information, refer to Front-mounted LEDs in Chapter 1.

7