Planet Technology ADW-4302A v2, ADW-4302B v2 Note:, General, Endpoint, Local LAN, Local LAN, Remote VPN, Remote LAN, Remote LAN, Policy Name, NetBIOS Enable, Data - VPN-AutoPolicy Screen

ADW-4302v2 User Guide

Data - VPN-Auto Policy ScreenGeneral

Policy Name	Enter a unique name to identify this policy. This name is not
	supplied to the remote VPN endpoint. It is used only to help
	you manage the policies.
Remote VPN	If the remote endpoint has a dynamic IP address, select
Endpoint	"Dynamic IP address". No "Address Data" input is required.
	Otherwise, select the desired option (IP address or Domain
	Name) and enter the address of the remote VPN endpoint
	you wish to connect to.
	Note: The remote VPN endpoint must have this VPN Gate-
	way's address entered as its "Remote VPN Endpoint".
NetBIOS Enable	Check this if you wish NETBIOS traffic to be forwarded over
	the VPN tunnel. The NETBIOS protocol is used by Microsoft
	Networking.
Local LAN
Local LAN	This identifies which PCs on your LAN are covered by this
	policy. For each selection, data must be provided as follows:
	•	Single address
		Enter an IP address in the "IP address" field. Typically,
		this setting is used when you wish to make a single
		Server on your LAN available to remote users.
	•	Subnet address
		Enter an IP address in the "IP address" field, and the de-
		sired network mask in the "Subnet Mask" field.
	The remote VPN endpoint must have these IP addresses
	entered as its "Remote" addresses.
Remote LAN
Remote LAN	This identifies which PCs on the remote LAN are covered by
	this policy. For each selection, data must be provided as
	follows:
	• Single PC - no subnet
		Select this option if there is no LAN (only a single PC) at
		the remote endpoint. If this option is selected, no addi-
		tional data is required.
	•	Single address
		Enter an IP address in the "IP address" field. This must
		be an address on the remote LAN. Typically, this setting
		is used when you wish to access a server on the remote
		LAN.
	•	Subnet address
		Enter an IP address in the "IP address" field, and the de-
		sired network mask in the "Subnet Mask" field.
	The remote VPN endpoint must have these IP addresses
	entered as its "Local" addresses.

80