ADW-4302v2 User Guide

Checking TCP/IP Settings - Windows 9x/ME:

5. Select Control Panel - Network. You should see a screen like the following:

Figure 14: Network Configuration

6.Select the TCP/IP protocol for your network card.

7.Click on the Properties button. You should then see a screen like the following.

Figure 15: IP Address (Win 95)

Ensure your TCP/IP settings are correct, as follows:

Using DHCP

To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows setting. Using this is recommended. By default, the ADW-4302v2 will act as a DHCP Server.

Restart your PC to ensure it obtains an IP Address from the ADW-4302v2.

Using "Specify an IP Address"

If your PC is already configured, check with your network administrator before making the following changes:

26