ADW-4302v2 User Guide

Figure 90: Routing Screen

Data - Routing Screen

RIP

RIP Direction

Select the desired RIP Direction.

 

 

RIP Version

Choose the RIP Version for the Server.

 

 

Static Routing

 

Static Routing

This list shows all entries in the Routing Table.

Table Entries

• This area shows details of the selected item in the list.

 

• Change any the properties as required, then click the

 

"Edit" button to save the changes to the selected entry.

Buttons

 

Add

Add a new entry to the Static Routing table, using the data

 

shown in the "Properties" area on screen. The entry selected

 

in the list is ignored, and has no effect.

Edit

Update the current Static Routing Table entry, using the data

 

shown in the table area on screen.

Delete

Delete the current Static Routing Table entry.

 

 

Save

Save the RIP setting. This has no effect on the Static Routing

 

Table.

Configuring Other Routers on your LAN

It is essential that all IP packets for devices not on the local LAN be passed to the ADW-4302v2, so that they can be forwarded to the external LAN, WAN, or Internet. To achieve this, the local LAN must be configured to use the ADW-4302v2 as the Default Route or Default Gateway.

Local Router

The local router is the Router installed on the same LAN segment as the ADW-4302v2. This router requires that the Default Route is the ADW-4302v2 itself. Typically, routers have a special entry for the Default Route. It should be configured as follows.

112