Advanced Features

VPN Server Status Screen

This screen is displayed when you click the VPN Server Status button on the Micro- soft VPN screen.

Figure 67: Microsoft VPN Status Screen

Data - Microsoft VPN Status Screen

Connection This table contains the following data about each current con-

Tablenection.

•User Name – The login name.

•Remote IP - The IP address of the remote client.

•Local IP –ADW-4302v2 will allocate a local IP address to remote client when user login.

•Start Time – This displays the start time when remote client login to the ADW-4302v2.

•Action - This column will contain a button which allows you to break (terminate) the PPTP connection.

Server Log

Auto Refresh

Use this to Enable or Disable auto-refresh for this screen. If

 

enabled, the screen will be updated every few seconds.

 

The status bar on the bottom on the screen will indicate if auto-

 

refresh is enabled or disabled.

View Log

This displays details of each connection or connection attempt.

 

You can use the Clear Log button to re-start the log, making new

 

messages easier to read.

Windows Client Setup

To connect to the PPTP (VPN) Server in the VPN Broadband Gateway:

•The Microsoft VPN feature in the VPN Broadband Gateway must be enabled and configured, as described in the previous section.

•Each user must have a login (username and password) on the VPN client data- base on the VPN Broadband Gateway.

•The remote client PC must be configured as described in the following sections.

•It is assumed that remote users have a Broadband (not dial-up) connection to the Internet.

89