The frame relay switch, which is responds one or more LMI types. There are three different LMI types: cisco, ansi and q933a.
encapsulation frame-relay– encapsulation frame relay type on serial interface
frame-relay map ip protocol address dlci [broadcast gateway-down interface-down payload-compression] – configure static address mapping
frame-relay dlic-group – assign DLCI to some group frame-relay fist-dlic – the number of first dlci (16-1007)frame-relay intf-type – configure frame-relay interface type (dec, dte) frame-relay inverse-arp – Enable/Disable inverse ARP frame-relay lapf – set lapf parameter
frame-relaylmi-n391– set the counter on PVC status enquiry message frame-relaylmi-n392– set the LMI error threshold
frame-relaylmi-n393– set LMI monitor event counter frame-relaylmi-t391– set LMI T391 timer (0-4294967295) frame-relaylmi-t392– set DCE request confirm timer (3-30) frame-relaylmi-type– set LMI type (ansi, cisco, q933a) frame-relaylocal-dlci– set local dlci
frame-relaynum-dlci– Assign the frame relay DLCI number