Appendix B Router Dialing

ERT-805 is support dial-up from modem which is allow user to remote to office from other place. And the

commands are:

Physical-layer async – configure serial interface as an async interface async mode [dedicated interactive ] – specify line mode for interface use

dialer-listlist number protocol ip [ deny list permit ] – configure DDR to control dialing by protocol dialer-group– configures an interface belong to a specific dialing group

dialer-inband– enable DDR and V.25 bits dialing on the async interface dialer string – specify the phone number to dial to a specific destination

Configuration Example

Router1 s1:10.1.1.1/8 s1:10.1.1.2/8 Router2
PSTNModemEthernete1:11.1.1.1/8

Configuring router Router1 int s1

encap pppip address 10.1.1.1 255.0.0.0 physical-layer asyncasync mode dedicateline flowcontrol hardware line cd normalline speed 9600 dialer in-band dialer string 2001 dialer-group 1line inactive-timer 60

Modem

Ethernet

e1:12.1.1.1/8

94