queue-list 10 default 5 queue-list 10 protocol ip 1 list 1

!

end

router#

router# show int s0/0

serial0/0 is administratively up, line protocol is up Hardware is RT800-E

Encapsulation PPP, loopback not set, keepalive set (10 sec! IPCP Open, CCP Closed, CDP Open, MPLSCP Close

Queueing strategy: custom-queue-list 2

Output queues: (queue #: size/max/drops/forwards), IP: 10.0.0.2 0:0/20/0/58 1:0/20/0/38 2:0/20/0/0 3:0/20/0/1914 4:0/20/0/0 5:0/20/0/0 6:0/20/0/0 7:0/20/0/0 8:0/20/0/0 9:0/20/0/0 10:0/20/0/0 11:0/20/0/0 12:0/20/0/0 13:0/20/0/0 14:0/20/0/0 15:0/20/0/0 16:0/20/0/0

5 minute input rate 116 bits/sec, 0 packets/sec

5 minute output rate 159 bits/sec, 0 packets/sec

1180 packets input, 1132182 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 fraee, 0 overrun, 0 ignored, 0 abort 1199 packets output, 51604 bytes, 0 underruns

0 output errors, 0 collisions, 1 interface resets

0 output buffer failures, 0 output buffers swapped out

1 carrier transitions, 0 internal resets, 0 switch line hook software flowcontrol state is none/none (in/out)

current tx-queue: 0/0/1(nor/exp/sum) DCD=up DSR=up DTR=up RTS=up CTS=up serial port mode is V.24 DTE(0x7e)

router#

90