2

low

limit 30

router#

 

router# show queue s0/0

Priority Queueing, priority-list 2 router#

router# show int s0/0

serial0/0 is administratively up, line protocol is up Hardware is RT800-E

Encapsulation PPP, loopback not set, keepalive set (10 sec) LCP Open

IPCP Open, CCP Closed, CDP Open, MPLSCP Close

Queueing strategy: priority-list 2

Output queue: (priority #: size/max/drops/forwards), IP: 10.0.0.2 high: 0/15/0/508 medium: 0/20/0/814

normal: 0/20/0/0 low: 0/30/0/0

5 minute input rate 54 bits/sec, 0 packets/sec

5 minute output rate 54 bits/sec, 0 packets/sec

1714 packets input, 1843207 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 1718 packets output, 69301 bytes, 0 underruns

0 output errors, 0 collisions, 1 interface resets

0 output buffer failures, 0 output buffers swapped out

1 carrier transitions, 0 internal resets, 0 switch line hook software flowcontrol state is none/none (in/out)

current tx-queue: 0/0/0(nor/exp/sum) DCD=up DSR=up DTR=up RTS=up CTS=up

6.4.4 Custom Queuing

Custom queuing allows user to specify a number of bytes to each queue and each protocol. The following examples are showing how to configure CQ.

PS: Please note that only one queue assign per interface.

queue-listlist number protocol ip queue-number queue-keyword- Establish custom queuing based on protocol type

87