2.3.2 Rack Mounting

To install the Web Smart PoE Switch in a 19-inchstandard rack, follow the instructions described below.

Step 1: Place your Web Smart PoE Switch on a hard flat surface, with the front panel positioned towards your front side.

Step 2: Attach a rack-mount bracket to each side of the Web Smart PoE Switch with supplied screws attached to the package. Figure 2-4shows how to attach brackets to one side of the Web Smart PoE Switch.

Figure 2-4Attaching the brackets to the Web Smart PoE Switch

Caution:

You must use the screws supplied with the mounting brackets. Damage caused to the parts by using incorrect screws would invalidate your warranty.

Step 3: Secure the brackets tightly.

Step 4: Follow the same steps to attach the second bracket to the opposite side.

Step 5: After the brackets are attached to the Web Smart PoE Switch, use suitable screws to securely attach the brackets to the rack, as shown in Figure 2-5.

Figure 2-5Mounting the Web Smart PoE Switch in a Rack

Step 6: Proceed with the steps 4 and steps 5 of section 2.3.1 Desktop Installation to connect the network cabling and supply power to your Web Smart PoE Switch.

- 10 -