Object

 

Description

 

 

Power limit mode

Allow to configure power limit mode of Web Smart PoE Switch. It can choose :

 

„

Port Priority Deliver PoE power by port priority setting

 

„

Total Limit. Set limit value of the total POE port provided power to the PDs.

 

For Web Smart PoE Switch, the total PoE power reservation from Port-1~8 is up to 110 watts

 

 

Power reservation

Show the total watts usage of Web Smart PoE Switch.

 

 

Port

Indicate the PoE port from 1 to 8.

 

 

PoE Function

Allow disable or enable the PoE function.

 

 

Priority

Allow assign port priority for the POE power management

 

It can choose the “port priority”, value range from “1~4” and the High priority is “1”.

 

 

Device class

Class 0 is the default for PDs. However, to improve power management at the PSE, the PD may

 

opt to provide a signature for Class 1 to 3.

 

The PD is classified based on power. The classification of the PD is the maximum power that the

 

PD will draw across all input voltages and operational modes. A PD shall return Class 0 to 3 in

 

accordance with the maximum power draw as specified by Table 4.1.

 

 

Current(mA)

It shows the PoE device current Amp.

 

 

Consumption [W]

It shows the PoE device current watt.

 

 

Power Limit

It can limit the port PoE supply watts.

 

Per port maximum value must less 15.4, total ports values must less than the Power Reserva-

 

tion value.

 

Once power overload detected, the port will auto shut down and keep on detection mode until

 

PD’s power consumption lower than the power limit value.

 

 

 

Table 4-26Descriptions of the POE Setting Web Page Screen Objects

- 61 -