2. HARDWARE DESCRIPTION

This product provides three different running speeds – 10Mbps, 100Mbps and 1000Mbps in the same Web Smart PoE Switch and automatically distinguishes the speed of incoming connection.

This section describes the hardware features of Web Smart PoE Switch. For easier management and control of the Web Smart PoE Switch, familiarize yourself with its display indicators, and ports. Front panel illustrations in this chapter display the unit LED indicators. Before connecting any network device to the Web Smart PoE Switch, read this chapter carefully.

2.1 Front Panel

The Front Panel of the Web Smart PoE Switch consists of 16 Auto-Sensing 10/100Mbps Ethernet RJ-45 Ports, Also the FGSW-1828PS provides 2 Gigabit TP/SFP combo ports either can be 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Factor Pluggable) interface.

The LED Indicators are also located on the front panel of the Web Smart PoE Switch.

Po E

PoEI n Use

Figure 2-1:FNSW-1608PS Switch front panel

 

 

Figure 2-2:FGSW-1828PS Switch front panel

2.1.1 LED indicators

 

System

 

 

LED

Color

Function

PWR

Green

Lights to indicate that the Switch has power.

Per 10/100Mbps port

LED

Color

Function

PoE In-use

Orange

Lights to indicate the port is providing 48VDC in-line power. (1-8 ports)

 

 

 

LNK/ACT

Green

Lights to indicate the link through that port is established at 10/100Mbps full duplex mode.

 

 

Blink slowly to indicate the link through that port is established at 10/100Mbps half duplex mode.

 

 

Blink fast to indicate that the Switch is actively sending or receiving data over that port.

Per 10/100/1000Base-T port / SFP interfaces (FGSW-1828PS only)

LED

Color

Function

 

 

Lights to indicate the link through that port is established at 10/100/1000Mbps full duplex mode.

LNK/ACT

Green

Blink slowly to indicate the link through that port is established at 10/100Mbps half duplex mode.

 

 

Blink fast to indicate that the Switch is actively sending or receiving data over that port.

 

 

Steady Lights to indicate the port is run at 1000Mbps.

100/1000

Green

Blink Slowly to indicate the port is run at 100Mbps

 

 

Off: indicate that the port is operating at 10Mbps.

#Notice: 1.Press the RESET button once. The Web Smart PoE Switch will reboot automatically.

2.Press the RESET button for 5 seconds. The Web Smart PoE Switch will back to the factory default mode; the entire configuration will be erased.

- 8 -