User’s Manual of GSD-800S / GSD-802S / GSD-802PS

4. CONFIGURATION

The Gigabit Ethernet Switch provide Web interface for Switch smart function configuration and make the Switch operate more effectively - They can be configured through the Web Browser. A network administrator can manage and monitor the Gigabit Ethernet Switch from the local LAN. This section indicates how to configure the Gigabit Ethernet Switch to enable its smart function.

#Notice:

The following section will base on the web screens of GSD-800S, for GSD-802S/802PS the display will be the same to GSD-800S.

4.1 Main Menu

After a successful login, the main screen appears, the main screen displays the Switch status. The screen in Figure 4-1 appears.

Figure 4-1Web Main screen

As listed at the left of the main screen, the configurable smart functions are shown as below:

◆System – Check the hardware, software version and System MAC address. Setting the IP address and SNMP management for the Gigabit Ethernet Switch.

◆Port Configuration - Setup per port Speed/Duplex mode, Flow Control and jumbo frame.

◆Port Mirroring - dedicated port monitoring for incoming packets.

◆VLANs – Configure VLAN Member / Port Configuration.

◆Rapid Spanning Tree – Configure Rapid spanning tree topography for any arrangement of bridges.

◆Link Aggregation – Port Trunk / LACP.