User’s Manual of GSD-800S / GSD-802S / GSD-802PS

 

Inactivity Timeout

Specifies a time period for the user login. The web interface will be auto logout if

 

 

there’re no actions from the login user.

 

 

The default value is 300 seconds; 0 means no inactivity time limit.

 

SNMP Enable

Enable or Disable the SNMP function of the device. While set to enable, the

 

 

manager could remotely get the interface status and received the traps

 

 

information.

 

SNMP Trap destination

The Trap function enables the Switch to monitor the Trap through the Web Switch

 

 

Utility, set the Trap IP Address of the manager workstation where the trap to be

 

 

sent.

 

SNMP Read Community

Functions as a password and used to authenticate the access right of the device.

 

 

The Read Community is restricted to read-only, for all MIBs except the

 

 

community table, for which there is no access.

 

SNMP write Community

Functions as a password and used to authenticate the access right of the device.

 

 

The Write Community accesses the device both read and write - configure to the

 

 

device via SNMP.

 

SNMP Trap Community

Identifies the community string of the trap manager.

 

 

 

 

 

 

 

 

#Notice: After change the default password, if you forget the password. Please press and release the “Reset” button in the front panel of Gigabit Ethernet Switch, the current setting includes VLAN, will be lost and the Gigabit Ethernet Switch will restore to the default mode.