User’s Manual of GSD-800S / GSD-802S / GSD-802PS

4.5.2 Per Port Configuration

The VLAN per Port Configuration page contains fields for managing ports that are part of a VLAN. The port default VLAN ID (PVID) is configured on the VLAN Port Configuration page. All untagged packets arriving to the device are tagged by the ports PVID. The screen in Figure 4-10 appears.

Figure 4-10VLAN Port Configuration

The page includes the following fields:

• VLAN Type

There’re two VLAN mode support – 802.1Q VLAN and Port-Bas VLAN

•Port

•Link Type

•Ingress Filtering Enable

•802.1Q – Packets income will be tagged with VID as the PVID setting. All ports on the switch belong to default VLAN (VID 1).

•Port-Base- Packets can only be broadcast among other members of the same VLAN group. Note all unselected ports are treated as belonging to the default system VLAN.

If port-based VLAN are enabled, then VLAN-tagging feature is ignored.

Select the physical interface for which you want to display or configure data.

Allow 802.1Q Untagged or Tagged VLAN for selected port.

When adding a VLAN to selected port, it tells the switch whether to keep or remove the tag from a frame on egress.

•Untag: outgoing frames without VLAN-Tagged.

•Tagged: outgoing frames with VLAN-Tagged.

Enabled - the frame is discarded if this port is not a member of the VLAN with which this frame is associated. In a tagged frame, the VLAN is identified by the VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID specified for the port that received this frame.