User’s Manual of GSD-800S / GSD-802S / GSD-802PS

•Flow Control

•Port Description

Allow Enable or Disable flow control for selected port.

•Enable – 802.3x flow control is enabled on Full-Duplex mode or Backpressure is enabled on Half-Duplex mode.

•Disable – No flow control or backpressure function on no matter Full-Duplex or Half-Duplex mode.

Can key in the description for the port.

#Note: When set each port to run at 100M Full, 100M Half, 10M Full, and 10M Half-speed modes. The Auto-MDIX function will disable.