Planet Technology GSW-2416SF 4.4 Getting Started, 4.4.1 General Guidelines, “help”, Figure, show ip, show vid, show port, show vlan, show pvid, GSW-2416SF>”, show version, show vlantag

4.4 Getting Started

4.4.1 General Guidelines

The GSW-2416SF allows users to configure the device via command line under console interface. Please type “help” or “?” for all available commands in the”GSW-2416SF>”prompt. The screen of available commands in Figure 4-4appears, and the detail description shown in Table 4-1.

	Figure 4-4GSW-2416SF available commands screen
Command		Description
show port		Show all port current status of GSW-2416SF.
show static [n]		Show per port TX/RX static of GSW-2416SF.
show vlan		Show current VLAN group status of GSW-2416SF.
show ip		Show current IP subnet address and default gateway information of
		GSW-2416SF.
show version		Show current Software and Hardware versions of GSW-2416SF.
show flowcontrol		Show current flow control status on each port of GSW-2416SF.
show vlantag		Show current VLAN Tagged status on each port of GSW-2416SF.
show vlanaware		Show current VLAN aware status on each port of GSW-2416SF.
show priority		Show current priority status of GSW-2416SF.
show pvid		Show current PVID value on each port of GSW-2416SF.
show vid		Show current VLAN ID of each VLAN Group of GSW-2416SF.
set port [n]		Set per port auto-negotiation, speed duplex mode, and admin down of
		GSW-2416SF.
set vlan [n]		Assign port to specific VALN Group of GSW-2416SF.

EM-GSW2416SFv1 - 14 -