set flowcontrol [n]

Enable/Disable the flow control function to specific port [n] of GSW-2416SF.

enable/disable

 

 

 

set vlantag [n]

Enable/Disable the VLAN Tagging to specific egress port of GSW-2416SF.

enable/disable

 

 

 

set vlanaware [n]

Enable/Disable VLAN-Aware function to specific port of GSW-2416SF.

enable/disable

 

 

 

set priority [n] [m]

Allow to configure the priority setting of GSW-2416SF.

 

 

set pvid [n] [m]

Assign PVID on each port of GSW-2416SF.

 

 

set vid [n] [m]

Assign VLAN ID [m] to specific VLAN Group [n]

 

 

set IP xxx.xxx.xxx.xxx,

 

mmm. mmm, mmm, mmm,

Assign IP address, subnet mask, gateway of GSW-2416SF.

ggg.ggg.ggg.ggg

 

 

 

set pass [oldpass]

Change the default password of GSW-2416SF, the maximum length is 8

[newpass]

characters.

 

 

factory default

Reset the GSW-2416SF to factory default mode.

 

 

reboot

Reboot the GSW-2416SF.

 

 

logout

Logout console interface of GSW-2416SF.

 

 

Table 4-1Detail description of GSW-2416SF available commands

#Notice: Only accept command in lowercase letter under console interface.

4.4.2 Show command

From the main menu screen (see Figure 4-3), input “show” and press enter. The show command list screen in Figure 4-5appears.

Figure 4-5Show command list screen

This show command list contains eleven items: show port : Please refer to chapter 4.4.2.1. show static [n] : Please refer to chapter 4.4.2.2. show vlan : Please refer to chapter 4.4.2.3. show ip : Please refer to chapter 4.4.2.4. show version : Please refer to chapter 4.4.2.5.

EM-GSW2416SFv1

- 15 -