4.4.2.6 Show flowcontrol
Display the flow control status on all ports of GSW-2416SF, this command allows you to view per port flow control status of the Switch.
Enabled – 802.3x flow control is enabled on Full-Duplex mode or Backpressure is enabled on Half-Duplex mode.. Disabled – No flow control or backpressure function on no matter Full-Duplex or Half-Duplex mode.
The flow control status screen in Figure 4-11appears.
Figure 4-11All ports flow control status screen
4.4.2.7 Show vlantag
Display the VLAN Tagging behavior on all ports of GSW-2416SF.
Enabled - traffic is transmitted as tagged frames.
Disabled -traffic is transmitted as untagged frames.
The all ports VLAN Tagging status screen in Figure 4-12appears.
Figure 4-12All ports VLAN Tagging status screen
