Figure 5-9VLAN 2 member assign Web page screen

#Notice:

Change VLAN settings for every time, you have to reboot the switch to apply new settings.

5.3.2.2 Overlap VLAN

The scenario described as follow:

1.Port-16 is the file server port for all the workstations

2.Port-1 to Port-15 is different devices that do need to see each other

Setup steps

1.Port Setting

1.1Assign VLAN 1 as the default VLAN group for all ports

1.2Assign VLAN 2 for the second VLAN group with Port-1 and Port-16

1.3Repeat the same steps for Port-2 to Port-15. i.e. 2 & 16, 3 & 16, ….., 15 & 16

2.PVID setup

2.1Assign “1” (i.e. ID of VLAN 1) to Port-16 as its PVID (Port VLAN ID).

2.2Assign “2” to Port-1 as its PVID

2.3Repeat above steps for Port-2 to Port-15 with its PVID, i.e. 3 (Port-2), 4 (Port-3), to 16 (Port-15)

After the above steps Port-1 to Port-15 is being separated physically due to it belongs to different VLAN groups (different VLAN). However, they all can access Port-16 due to Port-16 is using PVID 1 to communicate with port 1 to port 15.

#Notice:

Change VLAN settings for every time, you have to reboot the switch to apply new settings.

EM-GSW2416SFv1

- 42 -