•176x144
•160x120
•320x240
•640x480
-Power line frequency:
User should choose either 50 or 60 Hz to meet the power line frequency in your country.
-Quality:
There are two modes of video quality. User can adjust the video quality by either
•
•Compression ratio:
High: Video is better but frame rate may be slower
Low: Video is poor but frame rate may be higher
Normal: System default value.
-Video Output:
The Network Camera supports four kind of video standard. User can choose one of them to fit to the local video standard.
-Message Display:
You may choose the message that you want to display on the output video.
-Video Type:
The Network Camera supports two kind of video compression mode: MPEG4 or JPEG. User can choose one of the two compression mode based on requirement.
-Audio:
The Network Camera supports ADPCM for audio compression.
-Video Enable:
Enable this option will allow stream video to remote clients. Otherwise, the Network Camera will not stream video out.
-IR:
User can turn on or off the
Adjustment:
-Max Frame Rate:
User can set the desired max frame rate to match the limitation of bandwidth or other requirement.
-Exposure:
Auto: will adjust the internal gain automatically.
33/60