You can enable or disable motion detection function. If you enable motion detection, you can also setup detection sensitivity from one of five sensitivity levels.

When alarm was enabled, user can send the captured images to the pre-set E-Mail or FTP server.

Alert:

-Enable:

You can enable or disable motion detection function.

-Detect Method:

If you enable motion detection, you can also setup detection sensitivity from

one of five sensitivity levels.

-Video Record:

While alerted, the Network Camera can send out the recorded file and images

to pre-defined e-Mail or FTP.

Recording:

-Pre-record time:

The Network Camera can record the video for seconds before alerted. This

function is very useful to know the situation before event happened.

-Record time:

You can choose the duration of the record file.

-Gap to next detect:

You can choose the gap between two events.

E-mail:

-E-Mail To:

E-Mail address of the destination.

-From:

E-Mail address of the source, this Network Camera.

-Subject:

It’s a unique number for each Network Camera for identification.

-Outbound SMTP Server: The address of SMTP server.

FTP:

-FTP Server:

Type the FTP server name or the IP address of the FTP server to upload still

images and video file.

- Login Name:

37/60