the Network Camera.

Finder.exe program.

MP4 IP Finder.exe

• Re power the Network Camera if cannot find the unit within

program cannot find

1 minutes.

Network Camera.

• Do not connect Network Camera over a router. MP4 IP

 

Finder.exe program cannot detect Network Camera over a

 

router.

 

• If IP address is not assigned to the PC which running MP4

 

IP Finder.exe program, then the program cannot find Network

 

Camera. Make sure that IP address is assigned to the PC

 

properly.

 

• Antivirus software on the PC might interfere with the setup

 

program. Disable the firewall of the antivirus software during

 

setting up Network Camera.

Internet Explorer does

Make sure that your Internet Explorer is version 5.5 or later. If

not seem to work well

you are experiencing problems, try upgrading to the latest

with the Network

version of Microsoft’s Internet Explorer from the Microsoft

Camera

webpage at: http://www.microsoft.com/windows/ie.

 

 

MP4 IP Finder.exe

• Network may have trouble. Confirm the parameters and

program fails to save the

connections of the Network Camera.

network parameters.

 

 

Access Network Camera

 

 

Cannot access the login

• Maybe the IP Address of the Network Camera is already

page and other web

being used by another device or computer. To confirm this

pages of Network

possible problem, disconnect the Network Camera from the

Camera from Internet

network first, and then run the PING utility to check it out.

Explorer

• Maybe due to the network cable. Try correcting your

 

network cable and configuration. Test the network interface

 

by connecting a local computer to the Network Camera via a

 

crossover cable.

 

• Make sure the Internet connection and setting is ok.

 

• Make sure enter the IP address of Internet Explorer is

 

correct. If Network Camera has a dynamic address, it may

 

have changed since you last checked it.

 

• Network congestion may prevent the web page appearing

 

quickly. Wait for a while.

 

The IP address and Subnet Mask of the PC and Network

 

Camera must be in the same class of the private IP address

 

on the LAN.

 

• Make sure the http port used by the Network Camera,

 

default=80, is forward to the Network Camera’s private IP

 

address.

 

• The port number assigned in your Network Camera might

 

not be available via Internet. Check your ISP for available

 

port.

 

• The proxy server may prevent you from connecting directly

 

to Network Camera, set up not to use the proxy server.

 

• Confirm that Default Gateway address is correct.

 

• The router needs Port Forwarding feature. Refer to your

47/60