Chapter2 Hardware Connections

DC Power

LAN SocketJack

and LEDs

Factory

Default Reset

DC Power Jack

The DC power input jack is located on the Network Camera’s bottom. The input power is 5VDC. Note that supply the power to the Network Camera with standard power adapter included in package. Otherwise, the improper power adapter may damage the unit and result in danger.

LAN Socket

Beside the DC power Jack, the LAN socket is an RJ-45 connector for connections to 10Base-T or 100Base-TX Fast Ethernet cabling. Please use Category 5 “straight through” cable to connect the Network Camera to an Ethernet network switch or hub.

10/100M Ethernet LEDs

LED stands for Light-Emitting Diode. The Ethernet LEDs are located on the RJ-45 connector. These LEDs are used to indicate the status of Network connection.

Factory Default Reset

This button is hidden in the pinhole under then Network Camera’s bottom. Please refer to the Appendix A in this manual for more information.

7/60