4.2.2.7 Factory Default:
Recall the Network Camera factory default setting
The “Factory Default” button will restore to the factory default configuration, all information changed and saved on the flash will be lost, and restore to the factory default setting.
You will be prompt before restore to factory default setting.
Select “Factory Default” to continue.
The Network Camera will restore to factory default and reboot again. The Network Camera be connectable again after 20~30 seconds. Note that the IP address of this Network Camera will restore to default value: 192.168.0.20.
4.2.2.8 Restart:
Reboot the Network Camera by hardware reset
39/60