![](/images/backgrounds/32382/32382-14712x1.png)
Chapter 2 | 2 |
Installation |
This Chapter covers the physical installation of
∙Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
∙TCP/IP protocol must be installed on all PCs.
∙For Internet Access, an Internet Access account with an ISP, and a Broadband modem (usually, DSL or Cable modem).
ProcedureFigure 6: Installation Diagram1. Choose an Installation SiteSelect a suitable place on the network to install
∙Use standard LAN cables to connect PCs to the Switching Hub ports on
∙If required, you can connect any LAN port to another Hub. Any LAN port on
8