Broadband VPN Router User’s Manual
Disconnect | If connected to your ISP, hang up the connection. |
|
|
Clear Log | Delete all data currently in the Log. This will make it easier to read |
| new messages. |
|
|
Refresh | Update the data on screen. |
|
|
An example screen is shown below.
Figure25: Telstra Big Pond Status ScreenData - Telstra Big Pond ScreenConnection
Physical Address | The hardware address of this device, as seen by remote devices. |
| (This is different to the hardware address seen by devices on the |
| local LAN.) |
|
|
IP Address | The IP Address of this device, as seen by Internet users. This |
| address is allocated by your ISP (Internet Service Provider). |
Connection Status This indicates whether or not the connection is currently estab- lished.
∙If the connection does not exist, the "Connect" button can be used to establish a connection.
∙If the connection currently exists, the "Disconnect" button can be used to break the connection.
∙Normally, it is not necessary to use the Connect and Disconnect buttons unless the setting "Connect automatically, as required"
36