Physical Details
Front-mounted LEDs
Figure 2: VRT-311’s Front Panel
|
| Figure 3: |
Power | On - Power on. | |
| Off - No power. | |
Status (Red) | On - Error condition. | |
| Off - Normal operation. | |
| Blinking - This LED blinks during start up. | |
LAN | Each port has 2 LEDs | |
| ∙ | LNK/ACT |
|
| ∙ On - Corresponding LAN (hub) port is active. |
|
| ∙ Off - No active connection on the corresponding LAN (hub) port. |
|
| ∙ Flashing - Data is being transmitted or received via the corre- |
|
| sponding LAN (hub) port. |
| ∙ | 100 |
|
| ∙ On - Corresponding LAN (hub) port is using 100BaseT. |
|
| ∙ Off - Corresponding LAN (hub) port connection is using |
|
| 10BaseT, or no active connection. |
DMZ | ∙ | LNK/ACT |
|
| ∙ On - DMZ port is active. |
|
| ∙ Off - No active connection to the DMZ port. |
|
| ∙ Flashing - Data is being transmitted or received via the DMZ |
|
| port. |
| ∙ | 100 |
|
| ∙ On - DMZ port is using 100BaseT. |
|
| ∙ Off - DMZ port connection is using 10BaseT, or no active con- |
|
| nection. |
WAN | On - Connection to the modem attached to the WAN (Internet) port is | |
| established. |
4