VRT-311 User Guide

Rear Panel

Figure 4: VRT-311 Rear Panel

 

Figure 5: VRT-311S Rear Panel

Reset Button

This button has two (2) functions:

 

∙ Reboot. When pressed and released, VRT-311 / VRT-311S will

 

reboot (restart).

 

∙ Clear All Data. This button can also be used to clear ALL data

 

and restore ALL settings to the factory default values.

 

To Clear All Data and restore the factory default values:

 

1. Power Off.

 

2. Hold the Reset Button down while you Power On.

 

3. Keep holding the Reset Button for a few seconds, until the RED

 

LED has flashed TWICE.

 

4. Release the Reset Button. VRT-311 / VRT-311S is now using

 

the factory default values.

WAN port

Connect the DSL or Cable Modem here. If your modem came with a

(10/100BaseT)

cable, use the supplied cable. Otherwise, use a standard LAN cable.

DMZ port

PCs or devices connected to the DMZ port are isolated from the

 

LAN.

 

If you have a server you wish to make available to the public, you can

 

connect it here. To use multiple servers, use a standard LAN cable to

 

connect the DMZ port to a normal port on another hub, and connect

 

your servers to the hub.

10/100BaseT

Use standard LAN cables (RJ45 connectors) to connect your PCs to

LAN connections

these ports.

 

Note:

 

Any LAN port on VRT-311 / VRT-311S will automatically function

 

as an "Uplink" port when required. Just connect any port to a normal

 

port on the other hub, using a standard LAN cable.

Power port

Connect the supplied power adapter here.

6