Broadband VPN Router User’s Manual
| nected to the Internet. But if using a Dynamic IP Address, this value |
| can change each time you connect to your ISP. There are 2 solutions |
| to this problem: |
| ∙ Have your ISP allocate you a Fixed IP address. |
| ∙ Use the DDNS feature (Internet menu) so you can connect using |
| a Domain Name, rather than an IP address. |
|
|
Port Number | Enter a port number between 1024 and 65535. The default for HTTP |
| connections is port 80, and for HTTPS port 443. Using either of these |
| is NOT recommended. The default value is 8080. |
| The port number must be specified in your Browser when you con- |
| nect, as explained above. |
|
|
Allow Remote | This allows you to restrict remote access by IP address. Select the |
Access | desired option. |
| ∙ Everyone - Remote user's IP address is not checked. |
| ∙ IP address range - Only IP addresses in the range specified will |
| be allowed. If selected, you must enter the Start and Finish IP |
| addressses. |
| ∙ Only this PC - Only the specified IP address is allowed. If |
| selected, you must enter an IP address in the field provided. |
|
|
1.Ensure your Internet connection is established, and start your Web Browser.
2.In the "Address" bar, enter "HTTPS://" followed by the Internet IP Address of
e.g.
HTTPS://123.123.123.123:8080This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.
132