| Other Features and Settings | |
|
| |
Properties | ∙ Destination Network - The network address of the remote LAN |
|
| segment. For standard class "C" LANs, the network address is | |
| the first 3 fields of the Destination IP Address. The 4th (last) | |
| field can be left at 0. | |
| ∙ Network Mask - The Network Mask for the remote LAN seg- | |
| ment. For class "C" networks, the default mask is 255.255.255.0 | |
| ∙ Gateway IP Address - The IP Address of the Gateway or Router | |
| which | |
| destination above. (NOT the router attached to the remote seg- | |
| ment.) | |
| ∙ Interface - Normally, this will be "LAN". If NAT is disabled, | |
| the "WAN" option can be used for Routers which are accessed | |
| via the WAN port. | |
| ∙ Metric - The number of "hops" (routers) to pass through to reach | |
| the remote LAN segment. The shortest path will be used. The de- | |
| fault value is 1. | |
|
|
|
Buttons |
|
|
Save | Save the RIP setting. This has no effect on the Static Routing Table. |
|
|
|
|
Add | Add a new entry to the Static Routing table, using the data shown in | |
| the "Properties" area on screen. The entry selected in the list is | |
| ignored, and has no effect. | |
|
|
|
Update | Update the current Static Routing Table entry, using the data shown | |
| in the "Properties" area on screen. | |
|
|
|
Delete | Delete the current Static Routing Table entry. | |
|
|
|
Clear Form | Clear all data from the "Properties" area, ready for input of a new | |
| entry for the Static Routing table. | |
|
|
|
Generate Report | Generate a | |
|
|
|
Configuring Other Routers on your LAN
It is essential that all IP packets for devices not on the local LAN be passed to
Local Router
The local router is the Router installed on the same LAN segment as
Destination IP Address | Normally 0.0.0.0, but check your router documentation. |
|
|
Network Mask | Normally 0.0.0.0, but check your router documentation. |
|
|
Gateway IP Address | The IP Address of |
|
|
Interface | LAN |
|
|
Metric | 2 |
|
|
135