Wireless Station List | Planet Technology WAP-6100 manual

Current IP Settings

•This section shows current IP address setting including IP address, Subnet Mask, Default Gateway and DHCP status.

Current Wireless Settings

•This area shows current wireless setting including operation mode, wireless mode, SSID, channel and security setting.

4.1.2 Wireless Station List

This page can help user identify current clients who already associated to the WAP-6100. You can also click on the MAC address column then the system will show the detail technical information for each wireless station.

The page below describes the detail connection information with each station. You can get all information needed right here.

Image 15

Planet Technology WAP-6100 user manual Wireless Station List, Current IP Settings, Current Wireless Settings

Contents

802.11g Wireless LAN Outdoor CPE AP Copyright Safety Table of Contents Page Introduction Package ContentsFeatures Specification Wireless Performance Environmental factors Site selection Hardware Installation Outdoor Installation Warning DON’T Touch That PERSON, or YOU MAY be Electrocuted Initial Setup Setup ProceduresClick on Start Menu/ Run Page System Information Web ConfigurationAccess Point Mode System Summary Wireless Station List Current IP SettingsCurrent Wireless Settings Device Name AdministrationOperation Mode System Properties IP Settings Wireless Network Wireless SecuritySsid WEP Authentication type WPA-PSK Radius secret WPARadius server Radius port Wireless Advanced Settings RTS/CTS threshold Protection modeFragment length 256-2346 Backup / Restore Settings Default settings Current settings immediatelyMAC Filter Reboot Firmware Upgrade Connection Status Wireless Client Mode Bssid Site Survey Network mode Ethernet Client List Repeater Mode Wireless Network WDS Link Settings Wireless Bridge Considerations before installation WDS Security Settings Appendix a Glossary