Planet Technology WAP-6100 user manual Web Configuration, Access Point Mode, System Summary

Chapter 4 Web Configuration

Web configuration provides a user-friendly graphical user interface (web pages) to manage your WAP-6100. An AP with an assigned IP address (e.g. http://192.168.1.1) will allow you to monitor and configure via web browser (e.g., MS Internet Explorer or Netscape).

1.Open your web browser.

2.Enter the IP address of your WAP-6100 in the address field (default IP address is http://192.168.1.1). Please note that your PC’s IP address should be on the same IP subnet of the WAP-6100. For example, you can configure your PC’s IP address to 192.168.1.2 if WAP-6100 is with IP 192.168.1.1.

3.A User Name and Password dialog box will appear. Please enter your User Name and Password here. Default User Name and Password are as below:

User Name: Admin

Password: (blank)

Please note the first character of user name is a capital letter.

4. Then you will see the WAP-6100 web configuration page after click on “OK”.

4.1 Access Point Mode

4.1.1 System Summary

System Information

•This will display system name and both Ethernet MAC address and Wireless MAC address. Current country setting and firmware version will also be available here.