feature, it is important to make sure the rules are not conflicted with each other.

Parameters

Description

Add

When you want to add a new QoS rule, press this button and refer to section

 

5.5.1 to add a new QoS rule.

 

 

Edit

When you want to edit the existing QoS rule, press this button and refer to

 

section 5.5.1 to edit QoS rule.

 

 

Delete Selected

Select the QoS rule which you would like to delete , then press this button to

 

delete.

 

 

Delete All

When you want to delete all the QoS rules, you just need to press this

 

button.

 

 

Move Up

Select a QoS rule and press this button to assign higher priority.

 

 

Remove Down

Select a QoS rule and press this button to assign lower priority.

 

 

Reset

Click “Reset” to clear your current selections.

 

 

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are save successfully. You may press “Continue” for configure other settings or “Apply” to restart WRT-414 with new configuration.

5.5.1Add/Edit QoS Rule

You can assign packet classification criteria by its source IP range, destination IP range, traffic type, protocol, source port range and destination port range parameters. The parameters that you leave as blank will be ignored. The priority of this rule will be applied to packets that match classification criteria of this rule. You can limit bandwidth consumed by packets that match this rule or guarantee bandwidth required by packets that match this rule.

- 42 -