Parameter

Description

Mode

Shows the current operation mode. You may set WRT-414 to other

 

operating mode by select other operating mode.

Band

2.4GHz (B): It forces the WRT-414 to operate in 802.11b only.

 

2.4GHz (G): It forces the WRT-414 to operate in 802.11g only.

 

2.4GHz (B+G): It allows the WRT-414 to operate in 802.11b and 802.11g

 

simultaneously.

ESSID

Please make sure the ESSID of the wireless network that you will

 

connected and enter the correct ESSID in this field. The default value is

 

“default”.

WLAN MAC

Keep default setting: WRT-414 will use it’s own MAC address to access

 

the wireless LAN.

 

Press “MAC Clone” button: It will use PC’s MAC address to access the

 

wireless LAN.

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are save successfully. You may press “Continue” for configure other settings or “Apply” to restart WRT-414 with new configuration.

6.4AP Bridge - Point to Point Mode

This function allows WRT-414 to bridge 2 wired Ethernet networks wirelessly.

- 63 -