configure the detail settings.

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are save successfully. You may press “Continue” for configure other settings or “Apply” to restart WRT-414 with new configuration.

6.6AP Bridge - WDS Mode

If you want WRT-414 to bridge to other WRT-414 and provide access for other wireless clients at the same time, you have to set the WRT-414 to “AP Bridge - WDS”. Simply speaking, “AP Bridge - WDS” function is the combination of “AP mode” and “AP Bridge-Point to Multi-Point mode”.

Parameter

Description

Mode

Shows the current operation mode. You may set WRT-414 to other operating mode

 

by select other operating mode.

Band

2.4GHz (B): It allows to select the transmit rate up to 11Mbps.

 

2.4GHz (G): It allows to select the transmit rate up to 54Mbps.

 

2.4GHz (B+G): It allows selecting the 802.11b and 802.11g data rates.

ESSID

The ESSID (up to 32 printable ASCII characters) is the unique name identified in a

 

- 66 -