WLAN. The ID prevents the unintentional merging of two co-located WLANs.

 

Please make sure that the ESSID of all stations in the same WLAN network are the

 

same. The default value is “default”.

Channel Number

Select the appropriate channel from the list provided to correspond with your

 

network settings. Channels differ from country to country.

 

Channel 1-11

(North America)

 

Channel 1-14

(Japan)

 

Channel 1-13

(Europe)

Associated Clients

You may press “Show Active Clients” button to check the connected client

 

information. After the button pressed, you will see the dialog box as below:

You may press “Refresh” to get the new client table or “Close” to close this dialog box.

MAC Address 1 ~6 If you want to bridge more than two wired Ethernet networks together with wireless connection, you have to enter the MAC addresses of otherWRT-414s that with join the bridging work into the fields.

Set Security IF you want to enable security to protect your wireless connection. Please press “Set Security” button and refer to section “3.2.8 Security setting for bridge mode” to

configure the detail settings.

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are save successfully. You may press “Continue” for configure other settings or “Apply” to restart WRT-414 with new configuration.

6.7Security setting of bridge mode

-67 -