Parameter

Description

 

 

Mode

Shows the current operation mode. You may set WRT-414 to other

 

operating mode by select other operating mode.

Band

2.4GHz (B): It forces the WRT-414 to operate in 802.11b only.

 

2.4GHz (G): It forces the WRT-414 to operate in 802.11g only.

 

2.4GHz (B+G): It allows the WRT-414 to operate in 802.11b and 802.11g

 

simultaneously.

ESSID

Please make sure the ESSID of the wireless network that you will

 

connected and enter the correct ESSID in this field. The default value is

 

“default”.

Channel Number

Select the appropriate channel from the list provided to correspond with

 

your network settings. Channels differ from country to country.

 

Channel 1-11 (North America)

 

Channel 1-14 (Japan)

 

Channel 1-13 (Europe)

WLAN MAC

Keep default setting: WRT-414 will use it’s own MAC address to access

 

the wireless LAN.

 

Press “MAC Clone” button: It will use PC’s MAC address to access the

 

wireless LAN.

After configuration complete, please click “Apply” button to save the configuration. Then you will see a screen to prompt you the settings are save successfully. You may press “Continue” for configure other settings or “Apply” to restart WRT-414 with new configuration.

6.3Station - Infrastructure Mode

WRT-414 serves as a wireless station (infrastructure). Connected to a PC or a small LAN (no more than 5 PCs), it allows the PC or small LAN able to access the wireless network via Access Point.

- 62 -