After press Add or Edit button in QoS screen, you will see the web screen below for user to setup their
QoS rule.
Parameters | Description |
Rule Name | Please give a name to the QoS Rule |
|
|
Bandwidth | You can limit the maximum bandwidth consumed by this rule by selecting |
| “Maximum”. You also can reserve enough bandwidth for this rule by |
| selecting “Guarantee”. The unit of bandwidth is Kbps. When we download |
| data from Internet, the unit of download screen shows is KBps. 1KBps is |
| equal to 8Kbps. When you enter the bandwidth, please make sure the |
| number you enter is correct. For example, if you want to limit users |
| download speed to 50KBps from Internet, you will need to enter 400Kbps in |
| the configuration. |
|
|
Local IP Address | Please enter the IP address of the local PC. |
|
|
Local Port Range | Please enter the port range. |
|
|
Remote IP Address | Please enter the IP address of the PC from remote site. |
|
|
Remote Port Range | Please enter the port range. |
|
|
Traffic Type | Select the traffic type of the packets that this rule will apply to. We list some |
| popular applications here to ease the configuration. You also can get the |
| same result by using other parameters, for example source or destination |
| port number, if you are familiar with the application protocol. |
|
|
Protocol | Please select the protocol TCP or UDP in the list. |
|
|
After configuration complete, please click “Save” to save the settings. Or you may press “Reset” to clear
the settings to enter again.
5.6NAT
- 43 -