3.5-1-4 Password Configuration

Allow user to modify the password

ØSelect the <Edit>

ØOld password: enter the old password

ØNew password: enter the new password

ØEnter again: re-enter the new password again

ØPress<Save>to save the configuration

3.5-2 Port configuration

In this function, user can setup every port status.

ØSelect <Edit>

ØUse TAB /Backspace key to move between items

ØState: The port can be set enable or disable mode. If the port status is in disable then this port will not receive or transmit any packet.

ØNegotiation: set the negotiation status of port. The port can be set auto or force mode.

ØSpeed/Duplex: set the port link speed and duplex mode

ØFC: enable or disable flow control function (flow control for full duplex mode)

ØBP: enable or disable back pressure function (back pressure for half duplex mode)

ØBandwidth In/Out: per port packet transmission rate control. Per level is 100Kbps.

ØPriority: set port to high or low priority

ØSecurity: enable or disable security function

13