Planet Technology WSW-2401 FDX/COL, Console ports, Hyper Terminal, communication parameters, 10/100Mbps Ethernet ports, 100Base-FXModule (Optional)

	Off	No device attached.
	Orange	The port is operating in Full-duplex mode.
FDX/COL
	Blinks	Collision of Packets occurs in the port.
	Off	The operating in half-duplex mode

10/100Mbps Ethernet ports

There are 24 10/100Mbps R-J45 ports with 1 slot for 1 or 2-port 100Base-FX fiber module. The RJ-45 ports are auto sense for 10Base-T or 100Base-TX connection and supports MDI/MDIX automatically crossover capability, which means the user, is able to connect to another switch or workstation without change the crossover cable.

	Media	Speed	Wiring	Maximum Distance
	10/100Mbps RJ-45	10Mbps	Category 3,4,5 UTP/STP	100m
	ports	100Mbps	Category 5 UTP/STP	100m
100Base-FX Module (Optional)
The optional module is 1 or 2 port 100Base-FX fiber module
	Media	Speed	Wiring	Maximum Distance
	WSW-1SC,	100Mbps	multi-mode fiber optic	2km
	WSW-1ST
	WSW-2SC
	WSW-2ST

Figure 2-3 WSW-1S Module Figure2-4 WSW-2S Module

Console ports

The RS-232 console port is an interface that directly connects to the PC. When the connection between the PC and switch is ready, run the Hyper Terminal and configure its communication parameters. The operating mode of the console port is:

ØBaud rate: 9600

ØData bits: 8

ØParity: none

ØStop bits: 1

4