Planet Technology WSW-2401 4.4-5Trunking, 4.4-5-1Aggregator Setting, Add, Apply, LACP:, Apply, Select, Remove, Delete, Priority:, Security:, Group ID:, Works port:, System priority:

each port

ØPriority: allow to set high, low and disable priority function

ØSecurity: allow user to enable security function. When this function is enabling, the port will locked without permission of address learning.

ØAfter setup complete, click Apply button

4.4-5 Trunking

This section display the detail status of trunking

4.4-5-1 Aggregator Setting

ØSystem priority: A value used to identify the active LACP. The Switch with lowest value has the highest priority and is selected as the active LACP

ØGroup ID: there are provide seven trunk groups, choose the Group ID and click Select button

ØLACP: allow user enable or disable LACP function. If enable, the group is LACP static trunk group. If disable, the group is local static trunk group. All port support LACP dynamic trunking group, if connecting the device that also support LACP, the LACP dynamic trunking group will be create automatically

ØWorks port: allow max four ports can be aggregated at the same time. If LACP static trunk group, the exceed ports are standby and able to aggregate if work ports fail. If it is local static trunk group, the number must be as same as the group member ports.

ØSelect the ports to join the trunk group. Click Add button to add ports.

ØClick Remove button to remove unwanted ports

ØClick Apply button to take effect and use Delete button to delete trunk group

39