3.5-3 Trunk Configuration
You can configure port trunk group
ØSelect <Edit>
ØUse TAB key move to the port that you want to add as trunk group
ØUse Space key to mark the port
ØUse TAB key move to trunk# (eg turnk 1, trunk 2…etc) to change the trunk# value to Static or LACP
ØPress<Save> to save the configuration
3.5-4 Port Mirroring Configuration
You can configure Port mirroring function
ØSelect<Edit>
ØMirroring State: The default value is “disable”. To enable port mirroring you must select one of port mirror:
l RX: RX packet only
l TX: TX packet only
l Both: RX and TX packet
ØAnalysis Port: All of the packets of mirroring port will be duplicated and sent to Analysis port
ØPort State: select the ports that want to mirrored
ØUse Space key to mark the port that want to mirrored
ØPress<Save> to save the configuration
14