4.4-2-2 Advanced

There are two section includes in Advanced setting which is Disable MAC Address Aging out and Priority Queue Service After setup complete click Apply button.

Disable MAC Address Aging out

ØAge-out Time: the number of seconds that an inactive MAC address remains in the Switch’s address table. The valid range is 300-765 seconds. The default value is 300 sec.

ØMax Bridge Transmit Delay Bound: limit the packets queuing time in switch. If enable, the packets queued exceed will be drop. This valid value are 1sec, 2 sec, 4 sec and off

ØEnable Low Queue Delay Bound: limit the low priority packets queuing time in switch. If the low priority packet stays in switch exceed Max Delay Time, it will be sent. The valid range is 1~255 ms. before enable this function the Max Bridge Transmit Delay Bound must be enable.

ØBroadcast Storm Filter Mode: provide off, 5%, 10%, 15%, 20% and 25% for broadcast storm control.

Priority Queue Service

ØFirst come First Service: the sequence of packets sent is depend on arrive order

ØAll high before low: the high priority packets sent before the low priority packets

ØWeight Round Ratio: select the preference given to packets in the Switch’s high-priority queue. These options represent the number of high priority packets sent before one low priority packet. For example: High weight: 5 and Low weight 2. It means WSW-2401 sends 5 high priority packets before sending 2 low priority packets.

ØQos Policy: provide 0~7 priority level

36