6:Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server.

?Please make sure that XRT-D’s DHCP server is the only DHCP server Note: available on your LAN.

Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3.

2d) Windows NT

1:Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear.

2:Double-click Network icon. The Network window will appear. Select the Protocol tab from the Network window.

3:Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not installed, click the Add button to install it now. If TCP/IP is installed, go to step 5.

4:In the Select Network Protocol window, select the TCP/IP Protocol and click the Ok button to start installing the TCP/IP protocol. You may need your Windows CD to complete the installation.

5:After you install TCP/IP, go back to the Network window. Select TCP/IP from the list of Network Protocols and then click the Properties button.

7